Summer in Moore, OK, can get pretty hot without working air conditioning. If your AC stops working, knowing what steps to take can help you get it up and running again quickly. This guide will walk you through common issues, offer solutions, and advise when to call contractors for professional help.
What Are the Common AC Problems in Moore, OK, Homes?
AC units, like any appliance, can encounter problems. Here are the most common issues homeowners in Moore might face:
Clogged Air Filters
Air filters trap dust, dirt, and other debris, but over time, they can become clogged, reducing airflow. This makes your system work harder, leading to inefficiency and potential system failure. In Moore, homes with pets or near construction sites may experience more dust accumulation.
Low Refrigerant Levels
If your AC is blowing warm air or not cooling properly, it could be due to low refrigerant levels. This can occur due to a leak in the refrigerant lines. Moore’s intense heat can strain AC units, leading to this problem, especially in older systems.
Frozen Coils
Frozen evaporator coils are often caused by dirty filters or a low refrigerant level. When coils freeze, they can no longer absorb heat effectively, resulting in poor cooling performance. If your AC stops blowing cold air, the coils might be frozen.
Faulty Thermostat
A malfunctioning thermostat can cause erratic temperature fluctuations in your home. It might cause the AC to shut off prematurely or not cool at all. This is a common issue, especially if the thermostat is old or improperly calibrated.
Electrical Issues
Electrical problems, like tripped breakers, faulty wiring, or worn-out capacitors, are another common cause of AC failure. These issues often occur when the system is heavily used during Moore’s hottest months, putting extra strain on the unit.
What Should I Do If My AC Stops Working in My Home Near Moore High School?
When your AC stops working, don’t panic. Here’s a step-by-step guide to help you troubleshoot the issue before calling for AC repair in Moore, OK.
Step 1: Check the Thermostat
First, ensure your thermostat is set to cooling mode and adjusted to the desired temperature. If it’s malfunctioning, it could cause the AC to stop working. If you suspect it’s the issue, try recalibrating or replacing the thermostat.
Step 2: Inspect the Circuit Breaker
Check your circuit breaker to see if the unit’s breaker has tripped. If it has, flip it back to the “on” position. If it trips again, this could indicate a more significant electrical issue that requires professional attention.
Step 3: Replace or Clean the Air Filter
A clogged air filter can restrict airflow, causing your AC to overheat. If the filter looks dirty, replace it with a clean one. This simple fix can sometimes resolve the issue and improve your system’s efficiency.
Step 4: Check the Condenser Unit
Next, inspect the outdoor condenser unit. Ensure there are no leaves, debris, or dirt blocking the unit’s airflow. A clogged condenser can prevent the system from cooling properly. Clear the area around the unit, ensuring at least 2 feet of clearance.
Step 5: Ensure Proper Drainage
If your AC is leaking or not working properly, it might be due to a clogged condensate drain. Check for any water around the indoor unit or blocked drain lines, and clean them out if necessary. This step can help prevent water damage and improve your system’s performance.
Step 6: Call a Professional HVAC Contractor
If the steps above don’t resolve the issue, it’s time to call a professional. A licensed Moore heat and air contractor can inspect your system, diagnose the problem, and perform necessary repairs.
What’s the Average Cost of Replacing an Old AC Unit in a Home in Moore, OK?
Replacing an old AC unit is a significant investment, but it’s often necessary when your system is inefficient or beyond repair. Here’s what you can expect when replacing an AC unit in Moore:
Factors Affecting AC Replacement Costs
The cost of replacing your unit depends on several factors:
- Size of the unit: Larger units, designed to cool larger spaces, tend to be more expensive.
- Brand and model: High-efficiency models or those from well-known brands can cost more but may offer long-term savings.
- Installation complexity: If your existing ductwork needs repairs or modification, this can increase the cost.
Average Price Range for AC Replacement
On average, replacing an AC unit in Moore, OK, can cost between $3,000 and $6,000, including installation. Standard models are typically at the lower end of this range, while high-efficiency systems and premium brands can increase costs.
Potential Additional Costs
Additional costs may arise for things like:
- Ductwork repair: If your ductwork is damaged or outdated, you might need to upgrade it, which can add $1,000 or more to the total cost.
- Permits: Depending on local regulations, you may be required to obtain a permit to install a new unit, which can increase the overall cost.
Financing Options for AC Replacement
Many HVAC contractors in Moore, OK, offer financing options to help with the upfront cost of AC replacement. Be sure to ask your contractor about any financing options or special promotions they may offer.
Personal Story: Excellent Service
When David’s AC broke down in the middle of summer, he didn’t know where to turn. Luckily, he called a trusted company, and the technician, Robert, came out quickly. David shared his experience:
“Robert came in, figured out the problem, fixed it in N efficient manor to minimize the cost to me. Excellent service! They care about their customers!!! Rare these days!”
Conclusion
When your AC stops working in your Moore home, it’s important to act quickly and methodically. By following the steps outlined in this guide, you can troubleshoot common problems and potentially avoid a costly repair. However, if the issue persists, it’s best to call an experienced HVAC contractor, such as Metro Heat and Air OKC, to diagnose and fix the problem. And if you’re looking to replace an old unit, consider the average costs and available financing options to make the process more manageable.
Remember, your comfort is the priority, and with the right help, you’ll be back to enjoying a cool, comfortable home in no time. Contact us, your local HVAC contractor, for all your AC needs today!
People Also Ask
1. How quickly can Metro Heat and Air OKC respond to an AC repair in Moore, OK?
We understand the importance of a functioning AC, especially during Oklahoma’s hot summers. We offer fast, same-day repair service whenever possible. We’re committed to ensuring your home stays comfortable as quickly as possible.
2. Do you provide AC installation and replacement services in Moore, OK?
Yes! In addition to repairs, we also offer professional installation and replacement services in Moore. If your system is outdated or inefficient, we can help you select and install a new unit that meets your home’s needs and budget.
3. Is Metro Heat and Air OKC licensed to work in Moore, OK?
Absolutely! We are fully licensed and insured to provide repair and installation services. Our technicians are highly trained to handle all issues with professionalism and expertise, ensuring the job is done right.
4. How often should I have my AC system serviced?
To ensure optimal performance, it’s recommended to have your system serviced twice a year, once in the spring before the cooling season and once in the fall to prepare for heating. Regular maintenance helps prevent costly repairs and keeps your system running efficiently.
5. Can regular AC maintenance help reduce my energy bills?
Yes, regular maintenance can help reduce your energy bills. A well-maintained system runs more efficiently, using less energy to cool your home. Tasks such as changing air filters, cleaning coils, and ensuring refrigerant levels are correct can lead to significant energy savings over time.
